How do you prove a hardware check works? Inside the R&D behind BoardSafe
Kunal Miind, founder of Vedametric, on testing a detector for something that is rare by design, the error nobody reports, and why the evaluation suite comes first.
BoardSafe, a check for tampered circuit boards, went on sale this year after trials with two Australian defence contractors. It compares the boards inside routers, servers and phone systems with the manufacturer's design, and flags added chips, swapped parts and altered firmware.
It was built by Vedametric, a technology company in Potts Point, Sydney. We asked its founder, Kunal Miind, how the research was run.
Edited for length and clarity.
The question
What was the research question?
Whether a proper hardware check could run on site, on every device, in under a minute. Until now it meant sending hardware to a specialist lab and waiting weeks, so most organisations checked a sample, or nothing.
Why was that research, not engineering?
Nobody could tell us the answer in advance. Real boards differ in small, harmless ways. Whether a fast check could tell those apart from deliberate tampering was something we could only find out by testing.
The test
How do you test for something rare?
You plant it. We added parts that aren't in the design, swapped others and changed firmware, then measured how much the check found. That's where the 97% comes from.
What does 97% mean?
97% of planted tampering, found in our internal testing. It's our number, on faults we planted. It isn't an independent result, and we say so.
A number without its method is a claim.
Kunal Miind, Vedametric
And the 3%?
That's why the scan is step one. Devices that pass get a numbered tamper-evident seal, and we re-check every year and after repairs.
Do false alarms matter?
As much as misses. Our risk register lists both. A check that cries wolf gets switched off.
The field
Why trial with defence first?
They're the hardest customers. Design files can't leave the site, staff need clearances and every inspection goes on the record. If it works there, it works for a bank.
What did that force you to build?
It runs on the customer's premises, on our own models, with no data sent to outside AI. Every inspection is logged against the device, and our staff hold security clearances.
The rules
Why publish a safety framework now?
The Prime Minister announced mandatory AI safety obligations on 10 November. We adopted all six two days later. Government and defence customers shouldn't have to wait for a law to know how we work.
What does it commit you to?
A risk register for each AI system, reviewed at least yearly. Retesting each model version before release. Telling customers about serious incidents within 12 hours. And letting regulators or a customer's evaluator test our models.
Client R&D
Do you do R&D for other companies?
Yes, in four stages: research, design, build, deploy. The first deliverable is always a problem specification and an evaluation suite.
Why the test first?
It's the contract for everything after it. Once the test exists, nobody can move the goalposts, including us.
Are you a registered research service provider?
No. So a client spending under $20,000 a year on R&D couldn't claim the tax incentive on our work. Above that, registration makes no difference to the claim.
One question every founder should ask?
How was this number measured?
BoardSafe in brief
| Item | Detail |
|---|---|
| Checks for | Added chips, fake or swapped parts, altered firmware |
| Time per board | Under 60 seconds |
| Detection | 97% of planted tampering, internal testing |
| Before launch | Trials with two Australian defence contractors |
| Runs | On site, on Vedametric's own models |
| Governance | AI safety and security framework, v1.0, 12 November 2026 |
Sources: BoardSafe and Vedametric's framework.
Reader questions
- What is BoardSafe?
- A check that compares the circuit boards in devices such as routers, servers and phone systems with the manufacturer's design, flagging added chips, swapped parts and altered firmware. It is made by Vedametric.
- How accurate is BoardSafe?
- In Vedametric's internal testing it found 97% of the tampering planted on boards, taking under 60 seconds a board. That is an internal figure, not an independent evaluation, and Vedametric labels it that way.
- Who runs Vedametric?
- Kunal Miind is its founder and CEO. The company is based in Potts Point, Sydney.